Alvarion Wi^2 AP CLI Especificaciones descargar pdf (Pagina 281)

BreezeMAX Wi² and BreezeACCESS Wi² System Manual 255

Appendix A -Troubleshooting

 If you cannot connect using Telnet, you may have exceeded the maximum

number of concurrent Telnet sessions permitted (i.e, four sessions). Try

connecting again at a later time.

3 If you cannot access the on-board configuration program via a serial port

connection:

 Be sure you have set the terminal emulator program to VT100 compatible,

8 data bits, 1 stop bit, no parity and 9600 bps.

4 If you forgot or lost the password:

 Set the AP to its default configuration by pressing the reset button on the

back panel for 5 seconds or more. Then use the default user name admin

and a null password to access the management interface.

5 If all other recovery measure fail, and the AP is still not functioning properly,

take one of the following steps:

 Reset the AP’s hardware using the console interface, web interface, or

through a power reset.

 Reset the AP to its default configuration by pressing the reset button on the

back panel for 5 seconds or more. Then use the default user name admin

and a null password to access the management interface.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 290 291

Sin comentarios

Alvarion Wi^2 AP CLI Especificaciones Pagina 281