Alvarion Wi^2 AP CLI Especificaciones descargar pdf (Pagina 49)

Installation

BreezeMAX Wi² and BreezeACCESS Wi²

System Manual 23

2 Expose the RJ-45 connector under the sealing cap on the Ethernet cable and

connect to the SU-ODU RJ-45 connector (Figure 2-9).

3 Put the sealing cap back in its place. Make sure that the small protrusion on

the side of the cap fits inside the hole on the connector's protective body.

4 Connect the other end of the Ethernet cable to the SU port on the Wi² unit.

5 Verify that the O-ring supplied with the service box kit is in place, attach the

service box to the unit and tighten the top nut.

6 Use appropriate sealing material to protect the connection to the SU-ODU

against moisture and humidity. Use removable sealing material to enable

future access to the connector.

Figure 2-8: Sealing Cap

Figure 2-9: Connecting the SU-ODU connector and inserting the Sealing Cap

NOTE

Use high quality sealing material such as Scotch® 130C Linerless Rubber Splicing Tape from 3M to

ensure IP-67 compliant protection against dust and water.

groove

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 290 291

Sin comentarios

Alvarion Wi^2 AP CLI Especificaciones Pagina 49